GeoExplorer
      Back to home
      1. Specto Technology Resources
      2. Automated Total Station (AMTS)
      3. GeoExplorer

      Total Station Communications settings to talk to GeoExplorer (ARTICLE)

      1. On the home screen, press the CONFIG button and press the 5.Comms button
      2. Click COMMS SETUP and make sure all settings match the screenshot below (NOTE:  These are the default settings)

        blobid0 (1)
      3. Click RS232C and make sure all settings match the screenshot below (NOTE:  These are the default settings)

        blobid1