Outdoor Monitors
      Back to home
      1. Specto Technology Resources
      2. Air Quality (Aeroqual)
      3. Outdoor Monitors

      Set up an Aeroqual in 1 minute (VIDEO)

      Hi, I am Mick from Specto Technology and today I'm going to show you how to set up an Aeroqual System from the case.

      1. Take out the tripod.
      2. Open the legs all the way and push the center metal frame, so it is in a horizontal position.
      3. Put the first pole in. There are six screws. Open the screw to let the pole in and then hand tighten.
      4. There's three at the bottom and three at the top.
      5. Once they are tightened, clip the mini Powermate on the back to power the monitor for 15 hours.
      6. Attach the case to the brackets that are already on the tripod. They'll fit snugly onto the monitor.
      7. Attach the power cable to the mini Powermate. It's a plug and play connection and is weatherproof.
      8. Turn the monitor on. There's a switch on the bottom right hand side of the monitor. Switch that to battery and the monitor will start running. You'll be able to hear the pump.