Mini Powermate - Portable Battery for an Aeroqual AQS1/Dust Sentry Monitor (VIDEO)

This guide walks you through the Mini Powermate connection setup process for an Aeroqual unit. Follow the step-by-step instructions to power the Aeroqual unit.

 

Instructions:

  • Connecting the Mini Powermate to an Aeroqual Unit

    • Now that the Aeroqual unit is securely mounted, it's time to power it on.
    • Today we'll use a mini power made to do so you.
    • To prevent damage, place the Mini Powermate on the back of the Aeroqual Pole mount bracket. Now, let's connect to the power.
    •  Now, let‚Äôs connect to the power.
    • Next, remove the lower waterproofing cover from the side of the Mini Powermate.
    • Using the cable on the Aeroqual unit, connect the end of the cable to the Mini Powermate.
    • Once connected, open the Aeroqual unit and turn the power knob to the "BATT" position.
    • Your Aeroqual unit is now powered on and ready for monitoring.
  • Charging the Mini Powermate

    • Let's charge the Mini Powermate.
    • Open the two latches located on top and open the case. In the case, there will be a power cord for charging.
    • In the case, there will be a power cord for charging.
    • Remove the lower waterproofing cover on the side.
    • Connect one end of the power cable to the Mini Powermate.
    • The other end of the cable will connect to a reliable AC power source.
    • You are now ready to go! Happy Monitoring!