![99745fd6-afc8-495e-a1a1-c5fa6c1501aa.png]](https://resources.spectotechnology.com/hs-fs/hubfs/99745fd6-afc8-495e-a1a1-c5fa6c1501aa.png?width=300&height=113&name=99745fd6-afc8-495e-a1a1-c5fa6c1501aa.png)
Do not press the ON/OFF button located on the bottom of the Gateway.
- Loadsensing Gateway Connection:
- Connect one end of the Ethernet Cable to the Ethernet port of the Gateway. Connect the other end of the Ethernet Cable to the PoE's Ethernet port that is labeled "PoE"
- Connect the power cable to the POE's Power port
- Connect the other end of the power cable to the wall socket
- Connect the USB-C to Ethernet (LAN) adapter to the USB port on the LoadSensing Gateway.
- Connect one end of the Ethernet cable to the Ethernet port on the USB-C to Ethernet adapter.
- If the external device has an Ethernet port, connect the other end of the Ethernet cable to the device. If the external device does not have an Ethernet port, skip this step.
- Connect the USB end of the USB-to-Ethernet adapter to your computer or tablet.
- Finally, on your PC, open your browser and navigate to http://169.254.0.1 to access the CMT Edge software. (The username and password will be the same as those on your GW information sheet.)
Ensure that the SIM card cover is securely tightened to prevent any potential damage to the SIM card.