Connect a Gill Weather Station to an Aeroqual System (VIDEO)

Today, we're going to be connecting a Gill weather station to an Airco system.  

1. Pop the Gill weather station into its bracket and tighten, so it's not going to move anywhere.
2. Put the pole onto the tripod. Just push down on the tripod.
3. Align the holes on the sleeve and put a screw through just to secure it.
4. Once it's secured, connect the cable to the monitor.
5. Make sure that the red dot on the weather station is pointed north. Swivel the pole in the right direction.
6. Connect the data cable.
7. Align the pins correctly and screw the sleeve in.
8. Tighten the screw the right the way in so there are no data issues.
9. Now the weather station is connected.