Delta Solution
      Back to home
      1. Specto Technology Resources
      2. Automated Total Station (AMTS)
      3. Delta Solution

      Access to Deltalink (ARTICLE)

      1. Connect to the Deltalink site

      • Deltalink access portal:  Click here
      • Select the link for the appropriate range of serial numbers
      • Enter the credentials provided eg. UserID: DeltaLink000423 Password: zj9P1fr2uGf7EnA1

      2. Connect to the VNC Viewer

      Installing a VNC viewer

      > Install Tight VNC viewer. 

      Starting the VNC viewer

      > Ensure that the Delta Link unit and your PC are on the same network, either using the Wi-Fi access point of the unit.

      > Depending on the connection to the Delta Link box, there are different logon procedures:

      • If you are connected to the Delta Link box via Wi-Fi (password: 33!dlwlandefault), you need the IP (192.168.88.5) or the hostname (for example, DeltaLink000003.local)
      • If a Wi-Fi connection is established, the connection is made via Hostname.local (for example, DeltaLink000003.local)

      • mceclip1
      • If an Ethernet connection exists, you can dial in via the IP address assigned by the
        DHCP server.
        mceclip0-1

      (for default Wi-Fi connection)
      Default IP: 192.168.88.5
      Default password: dlvnc

      > The VNC user interface appears. The programs DeltaLog and LinkConfig are now accessible

      mceclip1 (1)


      3. DIY Remote Access